Seattle Public Utilities Policy & Procedure

Subject: Standard, Connection, and Administrative Charges Rule

Number:

SPU-DR-01-09 Version 2

Effective:

April 10, 2009

Supersedes:

SPU-DR-01-09

Approved:

Ray Hoffman

Date:

4/9/2009 Page(s):

16

1.0 PURPOSE

1.1 To set fees for special recurring and non-recurring services provided by Seattle Public Utilities.

2.0 REFERENCES

2.1 Seattle Municipal Code 21.04.100, 21.04.105, 21.04.125, 21.04.465, 3.02

3.0 DEFINITIONS

3.1 Time and Materials the cost of a service as calculated by Seattle Public Utilities, including labor, equipment, materials, applicable permit fees and taxes, pavement restoration, overhead costs and any similar costs incurred by SPU while performing the service.

3.2 Normal Hours Monday through Friday from 7:30am to 4pm, excluding those holidays observed by the City of Seattle.

3.3 Extended Hours Monday through Friday from 4pm to 9pm from April through October, excluding those holidays observed by the City of Seattle.

3.4 After Hours times other than normal hours or extended hours

4.0 POLICY

4.1 New Service Installation

4.1.1 Standard Charges for installation of new service:

Domestic Services

Size Fee

3/4" $2,702

1" $2,886

1 1/2" $6,279

2" $6,900

3" CT $20,778

4" CT $33,030

6" CT $38,692

*Note: If new service is being installed with developer water main, see item 4.29.

Combination Fire/Domestic Services

Size Fee

4" $33,212

6" $47,361

8" Time and Materials, deposit $50,000

Fire Services

Size Fee

2" DC $7,675

4" $15,009

6" $19,608

8" $24,992

Service Conversions

Existing 4" DC to 4" Combo $33,212

Existing 6" DC to 6" Combo $47,361

Existing 8" DC to 8" Combo Time & Materials, $50,000 deposit

Note Service Conversions are subject to the connection charge in 4.1.2

Street Restoration

* Street restoration costs are in addition to the above charges and are based on street paving type and condition. Charges are based on a jobsite pre-installation inspection and in accordance with the requirements of the Seattle Department of Transportation's Street Opening and Restoration Director's Rules.

* For work on Moratorium Streets Time & Material

Per Seattle Department of Transportation's Pavement Opening and Restoration Policy, where streets have been paved recently, contractor will be charged additional cost to cover the increased street restoration costs

* Street restoration costs for Seattle Public Utilities work in State DOT Right-of-Way, City of Burien, Skyway, and the City of Shoreline are based on agreements with these Cities or State agencies. Charge will be determined by jobsite pre-installation inspection and street restoration agreement.

Other New Service Installation Standard Charges

* All required City, County, and/or State, and other permits and fees are in addition to the standard charges listed above. Current permit fees are shown below for reference only, and may change:

In unincorporated King County: add $140 permit fee plus $150/hr County inspection fee.

In Shoreline: add permit and inspection fee of $145/hr

In Lake Forest Park: add $200 permit and inspection fee

Within Seattle City Limits: add $101 street use permit fee, plus $150 street use inspection fee.

* For 3/4" and 1" services installed in conjunction with new water main construction, if ordered 30 days prior to estimated start of construction: $1,889 reduction from standard charges.

* For 2" and smaller domestic services installed concurrently with fire services in a common trench: 3/4" or 1" $1,889 reduction from standard charge. 1 1/2" or 2" $2,602 reduction from standard charge.

* For 10" and larger services (all types) time and materials.

* All services requiring installation in casings standard charge plus casing bid price.

* Properties with two abutting mains: service installed at standard charge when main to be tapped is selected by Seattle Public Utilities (SPU). Time and materials if installation is otherwise.

* Time and materials, but not less than the applicable standard charge, for all purveyor services, for all services tapped on transmission mains or for special circumstances as determined by the Director of Seattle Public Utilities (SPU), or designee.

* Contractor Standby Charge when site/contractor not ready as previously scheduled $ 485 per event

* Isolation valve, if required:

8" Isolation valve $7,303

10" Isolation valve $8,790

12" Isolation valve $11,766

16" or larger Time and materials, deposit $18,000

* Ring and Cover Casting, if required

For new or existing 3/4", 1" and all fire service: $686 additional

For new or existing 11/2" or 2" domestic services: $164 additional

* Automated Meter Reading equipment, if required by meter installation standards:

2" or smaller meter: $225 additional

3" or larger, single register (fire service) $225 additional

3" or larger, two register (domestic or combo) $396 additional

3" or larger, 2 register, with fire service $564 additional

in the same chamber

4.1.2 New Service Connection Charge

The new service connection charge is in addition to the metered service installation charges shown above. The charge is based on the Connection Charge Unit Rate of $916. Fire-only services will be charged 40% of the corresponding new service connection charge.

The connection charge rate results in connection costs of:

3/4" $ 916 1" $ 1,557 1 1/2" $ 3,023 2" $ 4,855 3" $ 10,076 4" $ 15,572 6" $ 30,228 8" $ 48,548 10" $ 70,532 12" $ 95,264 16" $ 153,888 20" $ 223,504 24" $ 302,280

4.2 Service Size Increase

* To increase service size of existing 2" and smaller service in the same location (within 30" of existing service) at customer request applicable new service installation charge will be made (see Item 4.1.1). No charge for meter removal or retirement will be made. Subject to limitations established by Director of SPU, or designee. EXCEPTION: To renew and increase 1/2" or 3/4" steel or plastic service to 1" copper service in same location (within 30" of existing service) at customer request $268

* Size increase request at a location exceeding 30" from existing service will be subject to a new service installation charge (Item 4.1.2) and service retirement charges (Item 4.6) for the existing service.

* Service size increases are subject to the Connection Charge and street restoration charges under 4.1.

4.3 Service Size Reduction (within 30" of existing service).

* 2" and under when reduced to smaller size $299

* All other sizes time and materials

* Service size decreases are subject to the street restoration charges under 4.1.

4.4 Meter Test (At request of customer)

Charge will be waived if tested meter is found to be overregistering.

* Tests Conducted at the Meter Shop:

Meter Shop test of 1" or smaller meter: $207

Meter Shop test of 1 1/2" meter: $463

Meter Shop test of 2" meter: $582

Larger than 2" meter: Time and materials deposit $500

* Field Testing of 1" or Smaller Meters $101

* Field Testing Retail Service Meters Outside Seattle Direct Service Area $681

4.5 Meter Removal

3/4" or 1" meter: $80

1 1/2" or 2" meter: $130

3" to 8" meter: $752

Larger than 8" meter: Time and materials deposit $800

Removal of illegal jumper: $80

4.6 Service Retirement

Abandonment with or without meter removal. This charge also applies to a customer requested service transfer from one abutting water main to another, not related to new water main construction.

1" and smaller: $1,423

1 1/2" and 2": $1,443

3" : $1,490

4" and larger: Time and Materials deposit $7,000

Service Retirement Second Trip due to contractor delay

When contractor needs continuous water service or some other condition requires SPU to return to job site to perform the retirement.

1" and smaller: $1,423

1 1/2" and 2": $1,443

3" : $1,490

Service retirements are subject to the street restoration charges under 4.1.

4.7 Meter Reset

For meter resets following customer-requested removals:

3/4" meter $133

1" meter: $193

1 1/2" meter : $322

2" meter: $429

3" or larger meter: Time and materials-deposit $700

Install Temporary Service Jumper

2" and smaller: $133

3" and larger: Time and materials deposit $700

For meter resets following credit-related removals:

Normal Hours All Other Times

3/4" or 1" meter: $ 135 $279

11/2" or 2" meter: $ 159 $332

3" or larger meter:

Time and materials $700 deposit $700 deposit

Install Temporary Service Jumper

2" and smaller: $137

3" and larger: Time and materials deposit $700

NOTE: If reduction in size occurs at time of reset, then charge reduction fee only.

4.8 Special Field Trips

* Meter Shut-Off or Turn-On Charge Including Fire Services. Charges are for each trip.

Normal Hours Extended Hours After Hours

3/4 2" meter $ 110 $ 193 $ 433

3" & larger $ 322 $ 469 $ 664

This charge may be suspended in special circumstances as determined by the Director of SPU or designee.

No charge for the first trip for a credit related turn-on during SPU normal business hours. Second and subsequent trips subject to applicable standard charge above.

* Investigate On-Property Loss of Water

When loss of water is caused by actions taken on-property Same charge as for meter turn-ons and shut-offs, above.

When investigating leaks on-property when the City water service line is intact Same charge as for meter turn-ons and shut-offs, above.

* Inspection Services: Re-inspection required because the requesting customer is not ready for inspection by deadline or stated date $133

* Special Meter Read

For Actual Readings meters of all sizes ordered in connection with property ownership or occupancy changes $76

For Obstructed Meter Readings $83

* Adjust buried, obstructed or low meter boxes or valve boxes caused by customer installed landscaping or resurfacing (3/4" to 2" meters) $330

* Trim customer-installed vegetation obstructing meter boxes or fire hydrants $197

* Replace customer damaged lock $31.70

4.9 Statement of Combined Utility Account

* For request by customer for billing system screen-print statement of account activity for each 12 month period $6

* For request by customer for formal statement of account activity, for each account number per 12-month period $47

* For request by another utility for water consumption information to be used for billing the retail services of that utility $2.09 per account for information covering any period of 12 months or less.

4.10 Process Returned Check or Draft

Includes checks returned for non-sufficient funds or other reasons which prevent processing $25

4.11 Collection Charges

* Late Payment Charge. Past due balances may be subject to a late payment charge that will include one or both of the following charges:

Collection Notice Charge: $10 for active account Urgent or Shutoff Notice, or closed account Final Notice.

Delinquent Interest Charge: Monthly interest at the legal rate on past due balances.

* Credit field visit in same bill period $35

* Service shut off charge for non-payment See Item 4.8

4.12 Duplicate Bill Preparation

For all duplicate bills produced at customer request after original bill was produced $6

4.13 Delayed Final Customer Billing

For request for final customer bill when notification is received more than 45 days after final bill date $34

4.14 Acquisition of Hydraulic Flow Data

* Where records are available for fire protection grading purposes No charge

* SPU measures hydrant flow, flushes main, and prepares flow test report $1,562

* Contractor measures hydrant flow with SPU assistance, SPU flushes main and reviews flow test results prepared by contractor $1,150

* Performance of hydraulic analysis and report to determine best alternative to meet or exceed fire flow requirements. Time and materials with $2,000 deposit.

* Preparation of Hydraulic Modeling Simulation Report, when a flow test is not feasible, during a declared water emergency, or when a calibrated hydraulic model is available $228

4.15 Non-Firefighting Hydrant Use Permit

* Permit fee: $29

* Charge for water use:

If water use is less than 8,000 gallons per day:

$32 per day September 16 May 15

$40 per day May 16 September 15

* For water use above 8,000 gallons per day, a hydrant meter is required and commercial rates are charged.

* During a declared water emergency, any hydrant permit users allowed to continue their permits will be charged at established surcharge commercial rate, if any.

* Billing fee: $68 for billing made by SPU for payment subsequent to hydrant permit use.

* Hydrant valve and meter assembly: $400 deposit for use of any SPU supplied hydrant equipment and material. Deposit refunded upon return of all equipment and material in same-as-issued condition. In the event of damaged equipment, SPU will keep a portion of the deposit equal to the cost of the damaged equipment, including overhead cost.

Installation and removal: $110 each

Water use charged at the commercial rate or surcharge commercial rate if during a declared water emergency.

4.16 Paint Hydrant

Paint Hydrant at customer request $130

4.17 Hydrant Reset

Set hydrant back or move closer to water main, where no retapping of main is required.

* Inside Seattle City Limits $7,001 (includes street use permit fee of $101 and traffic control review fee of $75)

* Outside Seattle City Limits $ 6,825, plus any of the following additional charges that may be required:

quick connect adapter $252

any city or County permitting, plan review or inspection fees.

4.18 Hydrant Relocation

Remove existing hydrant and move to new location, new tap on main required.

* Inside Seattle City Limits $13,010 (includes street use permit fee of $101 and traffic control review fee of $75)

* Outside Seattle City Limits $12,834, plus any of the following additional charges that may be required:

quick connect adapter $252

any city or County permitting, plan review or inspection fees.

4.19 Install New Hydrant on Existing Water Main

* Inside Seattle City Limits $6,818 (includes street use permit fee of $101 and traffic control review fee of $75)

* Outside Seattle City Limits $ 6,642, plus:

quick connect adapter $252

any city or County permitting, plan review or inspection fees.

* For new hydrants requiring supply lines in excess of 10 feet in length, the charge will be the greater of:

The applicable standard charge listed under (a) or (b) above; or,

Time and materials.

4.20 Install Vertical Extension on Existing Hydrant

* Inside Seattle City Limits $2,025 (includes street use permit fee of $101 and traffic control review fee of $75)

* Outside Seattle City Limits $1,849 plus any city or county permitting, plan review or inspection fees.

4.21 Cross-Connection Control Program

Charge for mailing reminder letters to customers who do not provide acceptable proof of satisfactory performance test of their backflow preventers within 30 days of receiving original notification, or to customers who have not installed backflow preventers as required $34 for each backflow preventer.

* Hanging shut-off notices $92

* Shut-off & turn-on Applicable standard charge for Special Field Trip as specified in Section 4.8.

4.22 Access Along or Crossing Transmission Right-Of-Way

* Gate Opening

Minimum $151

Charge may be in excess of the minimum depending upon the circumstances of opening.

* Pipeline Crossing Time and materials for employees and equipment stationed to protect the pipeline during crossing

4.23 Additional Services Which Are Billed As Time and Materials

* Relocation of Meter and Box Limited to a lateral move of 30" deposit amount to be determined upon order.

* Service Damage For repair of damaged curb stop or meter setter, tailrun, etc. time and materials, $150 minimum.

* Water main Cut and Cap For cut, cap and block of existing water main deposit amount to be determined upon order.

* Design and/or Install Pressure Reducer

SPU Design: Time and materials $8,200 deposit

Installation (by SPU): Time and materials.

4" PR (2" Bypass) $31,000 deposit

6" PR (2" Bypass) $33,000 deposit

8" PR (4" Bypass) $41,000 deposit

The deposit amounts listed above are the expected project costs, and do not include the cost of street repair. Street repair costs will be borne by the developer.

* Work Outside Normal Business Hours All work performed outside of SPU normal business hours due to customer request, or due to customer water supply concerns, will be charged at an overtime rate.

* State DOT Right-Of-Way When any work is to be performed in a SDOT right-of-way which necessitates a Letter of Justification $600 deposit required for application to SDOT by SPU.

* Installation Plans Water meter and fire hydrant installation plans may be prepared by SPU at the developer's expense. The cost to prepare the plans depends primarily on the availability of asbuilt information and the number and complexity of the existing utilities. An advance deposit of $360 is required from the customer before design work begins.

DEVELOPER PROJECTS

NOTE: Charges paid more than 12 months in advance of work performed will be recharged at current years rate.

4.24 Water Main Connection

For cut-in tee connection to charged water mains, SPU furnishes sleeve(s) to connect new tee into existing main. For wet tap connection, SPU furnishes tapping sleeve and tapping valve. Contractor furnishes all other materials, tees, valves, valve boxes and lids, fittings, sleeves, excavation, backfill, compaction and restoration. SPU performs shutdown and draining of existing mains, connection of new main, and restoration of service $3,635 per connection.

4.25 Water Quality Inspection, Sample Collection and Bacteriological Testing

* $546 for first 500 feet;

* $399 for each additional 500 feet thereafter.

4.26 Design Review, Plan Approval, Administration and Acceptance of Main

* $1,440 per water main project.

* CD-ROM containing GIS data of water system infrastructure associated with the water main project. $192

4.27 Construction Inspection

Rate includes travel to and from job site

0 350 lineal feet $5,761

351 700 lineal feet $7,105

701 1,050 lineal feet $10,369

Over 1,050 lineal feet requires Special Estimate (time & materials, $95/hr)

Time and materials will be charged for re-inspection caused by contractor.

4.28 Compaction Tests -

Required when contractor uses native or imported backfill instead of control density fill (includes In-place density per ASTM D 2922 & Maximum dry density per ASTM D 698) $534

4.29 New Service Installation (Developer) -

Standard Charges will be reduced for new service installation (3/4"2" domestic) in conjunction with developer installed watermains. None of the discounts for non-developer service installations listed in Section 1 apply to the developer fees listed below.

* The following conditions must be met:

o Property is within the direct service area of Seattle's water utility; and either:

o Developer is installing a water main to serve the property; or,

o In peak work load conditions, the Developer may be charged a reduced rate if the Developer will open trench, shore, backfill, and complete all street/sidewalk paving restoration.

NOTE: If above conditions are not satisfactorily met, Developer will pay SPU on a time and materials basis for completion of work.

* Charges for new service installations meeting the conditions above are:

3/4" Domestic $1,987

1" Domestic $1,987

1 1/2" Domestic $3,592

2" Domestic $4,875

2" Fire Service $7,527

3" CT $19,589

4" CT $25,847

6" CT $28,488

Combination Fire/Domestic Services

Size Fee

4" in residential street $20,433

4" in arterial street $20,433

6" in residential street $32,692

6" in arterial street $32,692

Fire Services

Size Fee

4" $12,325

6" $14,799

8" $23,238

4.30 REAL PROPERTY SERVICES

Leasehold Excise Tax is required on all permits above $250 unless exempt. Exemptions are defined by RCW 82.29A.130 and include utilities, entities not required to pay property taxes such as a non-profit agency, and situations where City does not own the underlying property.

4.30.1 Easements

The charges itemized below pertain to SPU's administrative costs only and do not include the value of real property rights.

1. $5,000 minimum deposit for actual time-and-material costs for easements granted or acquired, but not through the street vacation process (see Section C).

2. $3,500 for easement for infrastructure to be owned by SPU but installed by a developer, assuming the developer provides SPU with confirmed title, survey, legal description, and draft easement document.

4.30.2 Permits

Annual use fees will vary with type of permit; both administrative and annual use fees are due unless otherwise noted. Permits may be updated including annual use fees.

1. Administrative fees:

a. $1,600 for permit expected to require up to 16 hours of SPU time, or $3,000 deposit for time-and-material costs for permit expected to require more than 16 hours of SPU time.

b. $500 for permittee name change with no change in use. Permit, including use fee, will be updated at this time.

c. $100 for permit renewal for recurring use up to 21 days per year.

2. Annual use fees: Annual use fee may be reduced based on offsetting benefits, if any, to SPU.

a. Utility Crossing Permits: Permit for utility crossings within SPU fee-owned property over or under SPU infrastructure. No annual use fee.

b. Utility Use Permits (non tunnel): Utility use permits are primarily for linear use of SPU fee-owned property, surface, underground, or overhead, excluding SPU tunnels.

(i) $500 base annual use fee, plus 25 cents per linear foot over 1,000 feet, plus $250 per each vault, handhold or other utility box less than 8 cubic feet.

(ii) $500 annual use fee for each vault over 8 cubic feet

c. Utility Use in SPU Tunnels:

(i) $767 for each conduit or inner duct under 2 inches diameter

(ii) $1,534 for each conduit between 2 to3 inches diameter

(iii) $2,300 for each conduit (which can contain inner duct) 3 inches diameter up to 48 square inches in cross sectional area of the cable or conduit.

d. Non-Utility Surface Use Permits: Surface Use, Temporary use for less than 1 year, Parking Permits, Construction Staging Permits and Special Short-Term Use Permits.

(i) If active SPU use, formula to calculate the use fee is 10% of 50% of the assessed value of the adjoining property.

(ii) If no active SPU use, the formula is 10% of 100% of assessed value of adjoining property.

(iii) $1000 minimum use fee for six month use or less.

(iv) $50 per day for parking or short term surface use such as community sponsored non-profit events

(v) Permittee will pay for appraisal acquired by SPU.

4.30.3 Street Vacation Applications:

1. No charge if there is no SPU infrastructure.

2. $5,000 minimum deposit toward time-and-material when either there is SPU infrastructure in the street vacation area, or would impact other SPU infrastructure.

4.30.4 . Surplus, Sale or Exchange of SPU Fee-owned Property:

1. $5,000 minimum deposit is required for time-and-material cost when an individual initiates the sale of SPU property for their own benefit. Costs include SPU staff time, appraisal, research, surplus process, purchase and sale agreement, ordinance, closing and recording. Buyer will also pay for the value of the land.

2. When SPU initiates the surplus process for its own benefit, there is no administrative charge to the potential buyer. The buyer will pay for the value of the land.

4.30.5 Lease:

$5,000 deposit towards time-and-material administrative charges for leases of SPU-owned property for more than one year (approval by City Council). Rent, in addition to administrative fee, may be reduced by off-setting benefits to SPU.

4.30.6 Encroachments:

Encroachments are unauthorized uses of SPU fee-owned property or easement rights.

1. If SPU issues a permit for an existing use, both administrative charges and annual use fees are due after a 6 month grace period after SPU contacts encroaching property owner.

2. If existing use of property cannot be allowed, the time-andmaterial costs of removing the encroachment will be billed to the encroacher by SPU.

4.30.7 . Access to SPU Properties

1. $151 to open gate.

2. $60 per hour with a one hour minimum charge for entry to SPU facilities when security specialist is required for either access, or to stay with company workers while on SPU property

LABORATORY ANALYSIS

All laboratory analyses will be conducted at the discretion of the Water Quality Laboratory Manager and on the basis of time availability. Prices reflect the cost for routine analyses with standard reporting and turnaround times. The price for analyses not included in this list will be based on the cost for labor, equipment, material and overhead, as determined by the Water Quality Laboratory Manager. If available and mutually agreeable, analyses may be available on a call out basis at double the charges listed.

4.31 Bacteriological Analysis Per Analysis

4.31.1 Total Coliform (MF) $23

4.31.2 Total Coliform (MPN) $20

4.31.3 Total Coliform/E. Coli (MMO/MUG; P/A) $15

4.31.4 Coliform verification; including Fecal Coliform/E. Coli (EC/MUG)* $23

4.31.5 Fecal Coliform (MF) $23

4.31.6 Fecal Strep (MF) $20

4.31.7 Enteric culture identification (API) $92

4.31.8 Heterotropic plate count $25

4.31.9 Pseudomnonas (MF) $23

4.31.10 Biolog $137

4.31.11 Sample prep for non-drinking water $13 (filter/dilutions)

*This test is performed on drinking water samples that test positive for Total Coliform by the membrane filtration method. It is used to verify the presence of Total Coliform and simultaneously test for Fecal Coliform and E. Coli.

4.32 Chemical Analysis Per Analysis

4.32.1 Metals/Inorganics

4.32.1.1 Metals by Flame AA and Flame Emission

Screen $17 per element

Batch of 8 to 19 $37 per element

Batch of 20 or more $21 per element

4.32.1.2 Metals by Graphite Furnace AA

Batch of 1 to 19~ $41 per element

Batch of 20 or more $27 per element

4.32.1.3 Digestion for non-drinking water samples

$24 per sample

4.32.1.4 ICPMS 21 element screen

$237 per sample

4.32.1.5 ICPMS (less than 20 samples, 3 to 7 elements/sample)

$23 per element

4.32.1.6 ICPMS (20 or more samples for 3 to 7 elements or 10 or more samples for 8 or more elements)

$15 per element

4.32.1.7 Metals Filtration $22 per sample

~ If 2 or more metals can be analyzed simultaneously, then 10 samples of 2 metals qualify for volume discount.

ICPMS screen includes: Al, Ag, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Hg, K, Mn, Na, Ni, Pb, Sb, Se, Sn, Tl, Zn

4.32.2 Titrations

4.32.2.1 Total Alkalinity $20

Batch of 10 or more $14 per sample

4.32.2.2 Calcium or Hardness, edta $22

Batch of 10 or more $15 per sample

4.32.3 Organics

4.32.3.1 Total Trihalomethanes (TTHMs) $95

4.32.3.2 Total Organic Carbon (TOC) $28

4.32.3.3 Haloacetic Acids (HAAs) $132

4.32.3.4 Dissolved Organic Carbon (DOC) $36

4.32.3.5 DBP Formation/Simulate Distribution System (Prep only)

$76

~ If 2 or more metals can be analyzed simultaneously, then 10 samples of 2 metals qualifies for volume discount.

4.32.4 Nutrients

4.32.4.1 Total Nitrogen $23

4.32.4.2 Total Phosphorus $23

4.32.4.3 Nitrate-Nitrite $23

4.32.4.4 Soluble Reactive Phosphorus $22

4.32.5 Other Procedures

4.32.5.1 Color $9

4.32.5.2 Copper (comparitor, colorimetric) $10

4.32.5.3 Fluoride (potentiemetric) $13

4.32.5.4 Iron (colorimetric comparitor) $10

4.32.5.5 pH, potentimetric $13

4.32.5.6 Specific conductance $10

4.32.5.7 Turbidity $9

4.32.5.8 Chlorine Residual, colorimetric $10

4.32.5.9 Chlorine Demand

Single contact time at the requested temperature, pH, and Cl2 dosage $93

For each additional contact time, temperature, pH or Cl2 dosage on the same water source. $30

4.32.5.10 Seepage (minimum or sum of parameters tested) $53

4.32.5.11 UVA (254-545) $12

4.32.5.12 SOC-VOC Screen $160

4.32.5.13 VOC Screen $131

4.32.5.14 Nitrate-Nitrite Screen and UVA $25

4.32.5.15 Solids, Total Suspended $27

4.32.5.16 Solids, Total Dissolved $27

4.33 Limnological Analysis Per Sample

4.33.1 Algal biovolume and identification to genus $51

4.33.2 Algal Toxins $51

4.33.3 Flavor Profile Analysis (FPA) and Flavor Rating Assessment (FRA) $62